Sunday, 17 November 2013

Dulcijo neck progress

Laid out to see how it'll look

Working out the neck angle, a tricky job I often get wrong!


Neck heel shaping


A new neck extension rod made from scraps, drilling the hole in the neck at the correct angle is going to be difficult!


Monday, 4 November 2013

Some Dulcijo progress


Dulcijo neck cut out but despite having the time to work on it (as I'm unemployed - yet again) it's far too cold to do much out here.

Friday, 25 October 2013

Dulcijo

reskinned my "Ganjo" with a proper vellum skin, a tricky job in itself! The "ganjo" was a short necked guitar(ish) banjo I built several years ago by making a new neck for a zither banjo with a broken neck  but still wasn't happy with the result, nothing wrong with the reskinning but like most guitar banjos 6  strings make it sound muddy and the lower two don't sound good at all! But then stumbled across the Dulcijo
,  a cross between the dulcimer and banjo that really does sound authentic  and  (unlike the steel guitar) is immediately playable so have decided to covert it into one of these.Listen to this!

                                              Ready for bandsawing...more to come!

Lap Steel

I've always loved the sound of the lap steel and built this in June-July but C6 tuning has no relation to standard guitar tuning and I can't play it at all! Just as well it didn't cost much to build!

Saturday, 2 February 2013

The perils of Danish oil


I wanted to make my guitar look pretty and make the body colour match the neck so I decided to apply some danish oil as this was far easier to apply than varnish, I had heard not being hard like a varnish that it could effect the sound quality but considered my box guitar to lowly for it to notice WHAT A MISTAKE! The moment I wiped some across the sound board it was like my strings had aged a year or two! Instant mahogany to plywood! I know it hasn't had a chance to dry yet but  I've already unstrung it and scraped down the top under the strings and intend to do the rest in time,the top is super thick so it isn't exactly risky and  hopefully it will start to improve once the oil has dried a bit more. 
 --------------------------- That was on Tuesday, last night (Friday) it had improved a little but not back to anything like how it was but I took it out to an acoustic open floor night but was glad I took an amp bcz it was almost inaudible even in a quiet venue like that. But through an amp it sounded GREAT and got encouraging comments from other players, I think I have a new main gigging guitar!

Sunday, 27 January 2013

Free recycled guitar done!

I still want to scrape down some of the sides but basically it's finished. I need to practice a song so I can take it to an open mic on Friday.  It's not the easiest guitar to play but is quite rewarding, reminds of Dave Rawlings sound, a sweet trebely sound that stands out well against other acoustics.I'm still not sure wheather or not to Danish oil it or not, I quite like the worn  look.

Saturday, 26 January 2013

Electrics

Opening up the hole for the preamp to sit in proved the guitar really needs a larger sound hole as it sounded better, more open like the top was moving more so maybe a small one on the front in line with the existing port?? Recessing it like this hides it a little and makes the controls less likely to be damaged. Also I have to fit the battery somewhere and the output jack. I hope it hasn't spoilt it's vintage look too much but it came from the same guitar so seemed to make sense to use it